SUCTION SYSTEMS | High Pressure Waterjet Systems, Suctions Systems, Hydarulic Power Packs,

OUR PRODUCTS

High Pressure Reciprocating Pumps

High Pressure Waterjet Systems

Suction Systems

Hydraulic Power Packs

Tools & Accessories

Material Handling Equipment & Solutions

SUCTION APPLICATIONS

Sludge Sucking and Sludge Dumping

In many water and sewer pipe systems there is sediment at the bottom of the pipelines, consisting of sludge or semi-dry viscous mass which is difficult to handle. Also, the sediment often contains toxic substances.

Our Suction Systems deals with the problem more efficiently than a traditional sludge sucker or a combined unit, especially if the sludge is environmentally hazardous, by sucking it as dry as possible and collecting it in a closed tank.

Process Industry

Our Suction Systems equipped with suction units or connected to mobile vacuum loaders, have a wide application range within process industries, for instance manufacturing of cement and other bulk materials where large volumes of material are handled using conveyor worms, conveyor belts, scoop filters, vibration conveyors, etc. If a conveyor belt breaks down, the problem must be dealt with immediately in order to minimise the costly down-time.

ARS SUCTION UNIT

Click On the Image for a Larger View

-------------------------------------------------------------------------------------------------------------------------------------

Suction operation can carried out by sucking out slit, grinding sand, grinding dust with coolant water, slurry, mud, grit, wastewater, etc, from end application areas like cesspit, sewer line, septic tank, gullies.

Suction Unit for Dry Powder & Sand Sucking Application

Material can be sucked from depth up to 5 meter in conventional / standard unit fitted with sliding vane type blower. Utilizing the deep suction unit provided with a roots type exhauster the sludge material can be transported from 20 meter or more.

SPECIFICATION

Suction Unit for liquid/Sludge Sucking Application

ARS suction unit tank capacity 1000 to 5000 liters, (customer requirement) welded steel construction with dished end front side of the tank. A level sight glass is provided for the tank. Sludge draining is also through a 100NB valve provided in front of the tank.

FILTERS

This unit having two filters

1.AIR FILTER UNIT,
2.SECONDARY SHUT OFF UNIT.

1. AIR FILTER UNIT

Filter unit is provided with filter element. The filter unit is mainly used to remove the fine particles and moisture. It consists of one number of wire mesh / paper filters and it will observe both moisture and fine particles and allow the dust free air to enter the blower. The control filter hatch is filled with insulation to observe the noise pollution.

2. SECONDARY SHUT OFF UNIT

Suction Cum Jet Rodding Unit

ARS Hydrojet - Jet Rodder

The secondary shut off valve is provided between suction tank and the filter unit. This shut off valve consist of ball arrangement to control the over flow of the water. This arrangement is provided to safeguard the filter arrangement and the blower.

Exhauster - Compressor

CONTROL VALVES AND SAFETY DEVICES

All safety devices like the pressure relief valve, vacuum relief valves, compound pressure gauges, level indicators & Electrical sensor, etc., required for the safe operation of the complete system are provided at the necessary / convenient locations on the unit.

Contact arshydrojet@vsnl.net for more information.